ade52

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.

Hi, I have just downloaded v8.0 beta1 of ASC, and the first thing that struck me, was we have regained the ability to maximize the program window, a very positive step that gives back the choice to the user full marks. However, I realised at the same time, a lot of this extra space is being taken up by the layout of the program. With this in mind, I would like to put the following suggestions forward. 1. Could you please consider putting the different options for cleaning and optimisation, on a sub menu under CARE, in the form of separate tabs, wide enough so that the scan results for each one can appear next to them, that would immediately release most of the space in the centre of the window, the SCAN BUTTON, could be placed in a similar position as the button in Uninstaller, that would release the rest of the space. Then, instead of another window appearing when the scan is being done, the scan button changes to the circular progress bar, then for the results, and finally when doing the fixing, in effect doing all the jobs. Then at the end of the scan, you would click on which ever tab has results showing, these would then appear in the centre of the window, utilising the whole area, this would then allow for a much clearer picture from the results, also allowing the user to arrive at a more informed decision, on what to do based on those results. This could be especially helpful and important, when displaying the results from the registry. 2. When results are displayed and they create more than one column, could you please consider having auto column width adjustment. 3. Finally, could you please consider adding the ability, when the user has chosen to maximise the window of ASC, for the last window position to be saved, this would remove the need to request this each time. I realise my first suggestion, would mean a radical change to the layout of ASC, and I don't hold out a lot of hope, but I think all that extra space gained from the return of the maximize button, would be better utilised for the benefit of the results obtained, rather than for the means of obtaining those results. Thanks.